ZN63M-12 (Magnetic type) Indoor Vacuum Circuit Breaker

Selection

Note:
The phase spacing of ZN63-12□M is usually P210mm, which is not marked on the model

Operating conditions

1. Ambient temperature: upper limit +40°C; lower limit -25°C.
2. Altitude: altitude not higher than 1000m.
3. Relative humidity: daily average value is not more than 95%, monthly average value is not more than 90%; saturated vapor pressure : The daily average value is not greater than 2.2kPa, and the monthly average value is not greater than 1.8kPa.
4. Earthquake intensity: less than 8.
5. The amplitude of electromagnetic interference induced in the secondary system does not exceed 1.6kV. This product complies with relevant national standards and The industry standard requires that it be installed in a place without fire, explosion hazard, corrosive gas and severe vibration.

Features

1. The arc extinguishing chamber and operating mechanism of the circuit breaker are arranged in a front-to-back configuration and connected as a single unit through a transmission mechanism.
2. The operating mechanism employs a permanent magnet mechanism and has functions for electrically closing and opening the circuit as well as manually emergency tripping.
3. The permanent magnet mechanism adopts a dual stable state form, characterized by intelligence, high reliability, long lifespan, and maintenance-free operation.
4. During the operation of the circuit breaker, the energy of the permanent magnet mechanism is transferred to the linkage mechanism,which then transmits it to the moving contact part.
5. The control circuit module exhibits high reliability and can withstand harsh conditions such as lightning strikes and surges during operation.
6. The energy storage module adopts capacitor energy storage, characterized by short energy storage time and long lifespan.
7. The mechanical lifespan is not less than 20,000 cycles.

Technical data

Technical datas are shown in Table 1

The mechanical characteristic parameters are shown in Table 2

Overall and mounting dimensions(mm)

Handcart type outline size drawing (suitable for 800mm cabinet)

Handcart type outline size drawing (applicable to 1000mm cabinet)

Fixed outline size drawing (for 800mm cabinet)

ZN63(VS1) -12 s fixed outline size drawing (for 1000 mm cabinet)